Competition Rubber Bumper Plates

Thinner Profile:

These new bumper plates 2.0 which come with a thinner profile, like for e.g. the 25kg plate of 88mm thickness is reduced up to 84mm & likewise the other plate’s thickness is also reduced which means now your plate loading capacity on the bar is increased.

Raised Flanges:

The Thicker Raised flanges are built to prevent direct contact between the lettering and center rings. Whether stacked on the bar or on a rack, the bumpers only come into contact with each other on the inner and outer flanges—reducing scuffing and helping to preserve the plate’s finish and lettering.

Improved Finish and Lettering:

These Bumper Plates comes with an improved Matte finish which provides an enhanced smooth yet clean look finish with easy to clean property. Also, the white-on-black lettering design looks sharp and highly visible even from a distance. These plates are a must-have for any workout that uses Olympic lifts, as well as premium home gyms, CrossFit boxes, and commercial gyms.

What is Shore A Durometer?

The Shore A Durometer rating is a measure of the hardness of a material. It ranges with a scale between 1-100 & generally, the bumper plates are rated above 65.

Higher Rating specify:

1. The Rubber is Harder & tends to bounce lesswhile, Strongly resistant to indentation.
2. Also, hard rubber is more durable and stiffer-which can have a dead bounce and better supports a barbell. Hence, our Premium Competition Bumper Plate has an optimal durometer of 94.

Lower Rating Specify:

1. The Rubber is soft & tends to bounce more while less resistant to indentation.
2. Though this soft rubber is good at absorbing impact, again, its durability becomes a concern.

Note: if you go owith too hard rubber, it can be noisy, and worse-hard rubber can crack. Likewise, going with too soft rubber again becomes the wrong choice.

Conclusion: The Bumper Plates with a durometer ranging 85-95 is ideally the best choice for you.

• Bounce Deadening & Efficient: These Competition Bumper Plates are made with Shore A Durometer rating of 94 which delivers a consistent deadening of a bounce even on heavy high drops, which also results in a lesser force exerted on the barbell. The less bounce meaning barbell, collar & the center disc are less prone to heavy impacts which increases the life of your equipment. Also, the less bounce assures you the more predictable bar travel when the weight dropped, which makes you practice safely even in a small place like a home gym.
• Secrete Supper Rubber: The typical factor that sets our Competition Bumper Plates apart from crowd is our Secrete Material Composition of Rubber. It is made to provides the excellent properties like deadening of bounce, elegant finish look & extreme durability with consistency in maintaining the quality of manufacturing.
• Weight Calibration & Steel Disc Insert: One of the distinctive factors which separates these Competition Bumper Plates from Standard Bumper Plates is the weight accuracy & consistency. These plates are made to be accurate within the IWF rules, i.e., +0.1% and -0.05%, meaning a 20kg plate only has a 20gm margin error which makes you assured about what exact weight you are lifting. These Competition Bumper Plates comes with a chrome-plated steel disc insert which consists of two sections that are bolted together with stainless steel bolts for securing the rubber from impacts, and also these steel discs are meant to concentrate the weight by which the thickness of the plates reduces.
• Thinner Profile: One of the most important factors for which the weightlifting athletes are attracted towards Competition Bumper Plates over Standard Bumper Plates is due to increased weight loading capacity. Generally, the Standard Bumper Plates can at most be loaded with 200kg Plates on a Standard Olympic Bar elsewhere Competition Bumper Plates can be loaded with 280kg due to its thin-plate profile, meaning your progression won’t stop at certain kgs. Also, with these Competition Bumper Plates, you can practice your powerlifting workouts without investing in addition Plates until your strength goes beyond 300kg 1RM.
• Thicker Raised Flanges: The Thicker Raised flanges are built to prevent direct contact between the lettering and center disc. Whether stacked on the bar or on a rack, the Plates only come into contact with each other on the inner and outer flanges – reducing scuffing and helping to preserve the plate’s finish and lettering. Also, these flanges are meant to ensure a secure grip for easy & safe handling during your workout sessions.
• Finish & Lettering: These Bumper Plates comes with an improved gloss-matte-gloss finish which provides enhanced smooth yet clean look finish with easy to clean property. Also, the white-on-color lettering design looks sharp and highly visible even from a distance. These plates are a must-have for any workout that uses Olympic lifts, as well as premium home gyms, CrossFit boxes, and commercial gyms.

Browse Category: Plates

Product Care & Maintenance Guide

• Gear Specification:
  

  Material	Super Rubber | Steel | Stainless-Steel
  Shore A Durometer Rating	94
  Weight Tolerance	+0.1% and -0.05%
  Steel Disc Insert Coating	Chrome Plating
  Finish	Gloss-matte-Gloss
  Plate Diameter	450mm
  Collar Opening	50.4mm
  Warranty	3 Year

• Color Coding:
  

  Color	Weight(KG)	Thickness
  Red	25	66mm
  Blue	20	53mm
  Yellow	15	42mm
  Green	10	33mm

   

Thinner Profile:

These new bumper plates 2.0 which come with a thinner profile, like for e.g. the 25kg plate of 88mm thickness is reduced up to 84mm & likewise the other plate’s thickness is also reduced which means now your plate loading capacity on the bar is increased.

Raised Flanges:

The Thicker Raised flanges are built to prevent direct contact between the lettering and center rings. Whether stacked on the bar or on a rack, the bumpers only come into contact with each other on the inner and outer flanges—reducing scuffing and helping to preserve the plate’s finish and lettering.

Improved Finish and Lettering:

These Bumper Plates comes with an improved Matte finish which provides an enhanced smooth yet clean look finish with easy to clean property. Also, the white-on-black lettering design looks sharp and highly visible even from a distance. These plates are a must-have for any workout that uses Olympic lifts, as well as premium home gyms, CrossFit boxes, and commercial gyms.

What is Shore A Durometer?

The Shore A Durometer rating is a measure of the hardness of a material. It ranges with a scale between 1-100 & generally, the bumper plates are rated above 65.

Higher Rating specify:

1. The Rubber is Harder & tends to bounce lesswhile, Strongly resistant to indentation.
2. Also, hard rubber is more durable and stiffer-which can have a dead bounce and better supports a barbell. Hence, our Premium Competition Bumper Plate has an optimal durometer of 94.

Lower Rating Specify:

1. The Rubber is soft & tends to bounce more while less resistant to indentation.
2. Though this soft rubber is good at absorbing impact, again, its durability becomes a concern.

Note: if you go owith too hard rubber, it can be noisy, and worse-hard rubber can crack. Likewise, going with too soft rubber again becomes the wrong choice.

Conclusion: The Bumper Plates with a durometer ranging 85-95 is ideally the best choice for you.